Designed to support stationary lines from above, allowing for approximately 1” to 1-1/2” of vertical adjustment after the pipe is in place. The lower load nut (not furnished), adjusts the pipeline to the proper elevation while the top load nut (not furnished), prevents loosening due to vibration, and must be installed, and tightened securely, to assure proper hanger performance.
- Oversized Clevis Hangers may require insulation insert to prevent concentrated loading and deformation of the U-Strap. Pipe Spacers and Insulation Inserts are available from C&P. The Figure 100PVC is only PVC coated on the contact surface of the pipe; completely coated PVC hangers are available, as a special order. Figure 100F is normally furnished electro-galvanized.
- Clevis Hangers for Copper Tubing, A.W.W.A. pipe, stainless steel pipe, with Pre-insulation, with Insulation Shields, Ductile Iron pipe, Cast Iron pipe, and felt lined are, also, available from C&P.
STEEL BEAM CLAMP WITH WELDLESS EYENUT
The Figure 297 beam clamp with eye nut is used when welding to the structure is prohibited for supports where some movement is expected. The clamping effect is produced by the “ice tong” action of the arms and is locked in place by the through bolt located just under the beam flange.
Material: Carbon Steel with Froged Steel Eyenut.
Compliance : Federal Specification A-A-1192A Type 28, MSS-SP-69 Type 28 and BSPSS-BS3974
Finish: Plain, Painted, Hoy-Dip Galvanized
Ordering : Specify figure number, rod size, clamp number and finish.